A novel satellite image encryption algorithm based on hyperchaotic systems and Josephus problem

With the rapid growth of the number of Earth observation satellite (EOS) supporting critical applications, it is required to improve the security techniques to protect the sensitive data and images during the transmission between the satellites and the ground stations. This paper introduces a new satellite image encryption algorithm based on the Linear Feedback Shift Register (LFSR) generator, SHA 512 hash function, hyperchaotic systems, and Josephus problem. LFSR generates a matrix that is used to construct the 512-bits value of the hash function. These bits are used to set the initial values and parameters of the proposed encryption algorithm. Firstly, the six dimensions (6-D) hyperchaotic system is divided into three parts, where every two equations are considered as one part. Secondly, the 1-D hyperchaotic logistic-tent system is considered as the controller to select one part. The selected part is used to generate a matrix that is XORed with the original image. Thirdly, the scrambling operation by Josephus sequences is applied to the output of the previous step by scrambling the rows and the columns according to the selected part to produce the pre-encrypted image. Finally, if the number of iterations is less than the required number which is considered as a parameter of the secret key, the previous operations will be repeated in the pre-encrypted image; otherwise, the pre-encrypted image is considered as the final cipher image. Experimental and analyses results show that the proposed algorithm has good performance in terms of high level of security, large enough key-space, tolerance to Single Event Upsets (SEU) as well as low time complexity.     

一种基于OPTICS聚类的仅测角导航目标检测算法

仅测角自主导航方法具有设备简单、复杂度低，功耗低的优点，在空间任务中具有广泛的应用前景.针对中远距离下空间目标特征少的特点，提出了一种利用基于OPTICS聚类算法的空间目标检测方法，可用于仅测角导航过程中的目标检测.对原始星图进行预处理提取星点及目标点，并结合星图识别的结果选择部分帧，使用经过改进的OPTICS聚类方法获得目标运动轨迹.最后，使用本文中的算法对软件仿真出的含有目标的高精度星图进行处理验证了算法的可行性.在卫星相对于空间目标抵近过程中，目标检测的水平误差及垂直误差小于0.15°的帧数分别占到了85.4%以及99.6%.相比AVANTI实验中的目标检测方法，减少了在轨任务中相关参数的调节，进一步提升了算法的自主性.     

基于GAN网络的红外图像生成技术

当将人工智能技术应用于军事领域中的目标识别任务时，针对由红外图片采集的局限性而造成的训练数据不足的问题，提出了基于生成对抗网络以生成红外图像的方法，实现了数据集的扩充。对基本的生成对抗网络进行了改进，将网络的输入由随机噪声变为真实图片，使之实现了图片到图片的风格转换，即彩色图片转变为红外图片。经过网络模型的搭建和训练，实验结果表明，该方法能够有效生成清晰和高质量的红外图片，解决了由红外数据不足而造成的网络训练不充分的问题。     

不同流速比超声速混合层气动光学效应研究

针对不同流速比混合层流场气动光学效应问题，首先采用大涡模拟数值方法进行了数值仿真，其次用光线追迹方法进行了气动光学效应仿真，最后对混合层的气动光学效应进行了评价。结果表明，混合层流场涡结构与光程差极小值存在一一对应关系，并且其流速比低的混合层气动光学效应更加严重。同时，研究了不同光学参数对斯特列尔比的影响，得到了相应的规律。     

移动机器人铣削制孔系统基准检测

结合航空大部件的数字化对接装配需求,设计了一套用于对接面铣削制孔的移动机器人加工系统,并提出具体的加工工艺流程。研究了基于激光轮廓扫描仪的大量散乱点云数据的预处理算法,提出基于栅格法和迭代拟合法的对接面特征提取算法。针对移动机器人加工系统在大场景下的高精度定位问题,提出基于扫描线法和最小二乘法原理的对接基准孔坐标找正算法。通过产品的加工实验验证,对接面铣削和制孔精度满足系统要求的各项技术指标,证明了本文提出的移动机器人铣削制孔系统的装配对接面加工方法能够精确地完成大部件数字化装配任务,对提高装配质量和效率具有重要意义。     

捷联式航空重力测量系统的数据处理方法比较与分析

重力数据处理对获取高精度重力异常值有着重要作用，是重力测量的核心技术。重力仪在搭载运动载体进行重力测量时，载体的高频振动对重力测量数据和GPS数据均会产生不可避免的干扰，导致提取的重力异常粗值含有大量高频噪声。围绕重力数据的处理方法这一核心技术，介绍了FIR低通滤波、零相移滤波、标准Kalman滤波、正反Kalman滤波4种滤波方法的基本原理，运用这4种方法处理了SAG捷联式重力仪的某次实际飞行测量数据，比对了基于SINS/GPS组合导航和SINS/DGPS组合导航的重力测量数据处理结果。通过对本次试验重复测线内符合精度进行比对，验证了4种方法的可行性和优劣性，同时验证了SAG重力仪的测量精度。     

Substitution of satellite-based land surface temperature defective data using GSP method

Land surface temperature (LST) as an important environmental variable provides valuable information for earth environmental system modelling. Currently, LST is obtained through satellite thermal sensors at various spatial and temporal resolutions. Although spatially continuous satellite-based LST measurements are intended to overcome the shortcomings of sparse ground-based LST measurements, LST images often contain anomalous values due to the existence of clouds or sensor malfunctioning. The problem becomes more serious where the users deal with high spatial resolution characterized by low temporal resolution. This study examines the capability of a newly developed graph signal processing (GSP) method using two-dimensional single-date thermal data. For this purpose, four Landsat/TIRS datasets are analyzed. The data of five elliptical regions on thermal images are eliminated and then reconstructed through the GSP method and using the LST values of the enclosing rectangles containing the ellipsoids. The results indicate that the temperature variation determined by the GSP method generally conforms to the original image LST values. According to a correlation test conducted on the original image LST and those obtained through the GSP method, the values vary from 58% to 95%, which is an above-the-average rate (RMSE from 0.69 to 2.27). The statistical analysis of the original image LST in both the elliptical regions and the enclosing rectangles containing the ellipsoids indicates that an increase in the variance of LST data causes an increased error in the calculation of temperature by the GSP method, and vice versa. The results of the analysis of variance (ANOVA) and Duncan test indicated that an increase in the number of the non-zero spectral bins would result in increased RMSE values for all the dates and the regions. Moreover, the model errors were significant at the 0.05 level across all the image date and five elliptical study regions. Based on the results, the use of this method is recommended for the reconstruction of LST missing values, where dissimilarity of atmospheric conditions limits the use of other methods that depend on the time series data of various dates and a great deal of data calculation.     

TopPixelLoss:类别不均衡的遥感影像语义分割损失函数

针对遥感影像中类别不均衡的小目标分割效果不理想的问题，提出了一种类别不均衡小目标二分类分割的损失函数——TopPixelLoss损失函数。首先计算出每个像素的交叉熵，然后将所有像素的交叉熵按从大到小进行排序，随后确定一个K值作为阈值，筛选出前K个交叉熵最大的像素，最后对于筛选出的K个像素交叉熵取平均，做为损失值。在ISPRS 提供的 Vaihingen 数据集上，使用PSPNet网络与普通交叉熵、FocalLoss、TopPixelLoss三种损失函数分别对车辆进行二分类分割试验。结果表明，不同的K值，使用TopPixelLoss损失函数的平均交并比（MIoU）、F1-score、准确度（ACC）都最高;当K值为5×104时效果最佳，MIoU、F1-score、ACC分别比FocalLoss提高了3.0%、5.0%、0.1%。TopPixelLoss损失函数是一种针对类别不均衡分割非常有效的损失函数     

基于生成对抗网络的空间卫星低照度图像增强

针对空间低照度成像条件下卫星光学图像信息受损严重的问题，提出了一种基于生成对抗网络的空间卫星低照度图像增强方法，提高了图像的平均亮度及对比度，恢复图像细节信息，为图像识别等图像处理技术提供更高质量的数据信息。首先，设计了一种密集连接的生成器，加强了各特征提取阶段中的信息传递以及多层特征的融合，减少了特征信息的损耗，更好地提取正常照度图像及低照度图像中相似的语义信息；并结合EnlightenGAN的思想，采用了全局 局部辨别器结构，使图像增强效果更自然。然后，在少量样本的条件下，利用非配对样本对该方法进行训练，并通过对输入图像进行随机缩放及翻转等数据增强方法提高模型训练效果，进而提升低照度图像增强性能。最后，对所提出的空间卫星低照度图像增强方法进行了仿真验证。试验结果表明，在空间低照度条件下，该方法在NIQE指标上较LIME及EnlightenGAN分别降低了1.034和0.699，保留了更多的图像细节，具有更高的整体和局部亮度、更高的对比度以及更自然的增强效果。     

基于深度学习的毫米波和亚毫米波成像仪的图像增强技术

风云四号卫星毫米波和亚毫米波成像仪(MMSI)数据根据采样方式分为过采样和非过采样数据。由于采样方式的影响,非过采样数据在采样过程中会有一定的信息损失。为解决采用简单的线性插值方法做精细化处理时提升精度有限问题,采用基于深度学习的方法增强MMSI亮温图像,设计卷积神经网络重建风云四号卫星MMSI的亮温图像和风云三号卫星微波成像仪亮温图像。实验结果显示:相比传统的双三次插值方法,在风云三号卫星微波成像仪亮温图像样本上峰值信噪比提升了1.13dB,结构相似度提升了0.01。实验结果表明:对于非过采样亮温数据,采用基于深度学习的方法增强图像具有更高的精度,同时可在其他微波探测仪数据中使用,具有很强的普适性。